Three waves of DNS hijacking attacks against consumer routers have been linked back to Google Cloud Platform abuse.
Three waves of DNS hijacking attacks against consumer routers have been linked back to Google Cloud Platform abuse.
The top cybersecurity and privacy trends that biggest impact in 2018.
Vulnerabilities in SSD Encryption, Bypassing Windows UAC, Botnet Pwns over 100,00 routers w/ ancient security flaw, Google hit with IP Hijack, and 1 thing you can do to make your internet safer and faster! Jason Wood from Paladin Security joins us for expert commentary to discuss how Phineas Fisher got away with hacking Team Hacker! […]
The post Botnet, Phineas Fisher, and SSD – Hack Naked News #196 appeared first on Security Weekly.
Cisco accidentally released Dirty Cow exploit code, Apache Struts Vulnerabilities, Zero Day exploit published for VM Escape flaw, Spam spewing IoT botnet infects 100,000 routers, and some of these vibrating apps turn your phone into a sex toy! Paul’s Stories These Vibrating Apps Turn Your Phone Into A Sex Toy Cisco Accidentally Released Dirty Cow […]
The post Apache, Dirty Cow, & Edge – Paul’s Security Weekly #582 appeared first on Security Weekly.
Threatpost editors discuss the highlights and biggest breaking news from this past week.
Five out of six name brand routers, such as Linksys, NETGEAR and D-Link, contain known open-source vulnerabilities.
Using a known vulnerability, the threat actor is listening to a variety of ports.
This is KillerBee – Framework and Tools for Attacking ZigBee and IEEE 802.15.4 networks.REQUIREMENTSKillerBee is developed and tested on Linux systems. OS X usage is possible but not supported.We have striven to use a minimum number of software dependencies, however, it is necessary to install the following Python modules before installation:serialusbcrypto (for some functions)pygtk (for use of tools that have GUIs)cairo (for use of tools that have GUIs)scapy (for some tools which utilize 802.15.4 Scapy extensions)On Ubuntu systems, you can install the needed dependencies with the following commands:# apt-get install python-gtk2 python-cairo python-usb python-crypto python-serial python-dev libgcrypt-dev# git clone https://github.com/secdev/scapy# cd scapy# python setup.py installThe python-dev and libgcrypt are required for the Scapy Extension Patch.Also note that this is a fairly advanced and un-friendly attack platform. This is not Cain & Abel. It is intended for developers and advanced analysts who are attacking ZigBee and IEEE 802.15.4 networks. I recommend you gain some understanding of the ZigBee protocol (the book ZigBee Wireless Networks and Transceivers by Shahin Farahani is reasonable, though still not great) and familiarity with the Python language before digging into this framework.INSTALLATIONKillerBee uses the standard Python ‘setup.py’ installation file. Install KillerBee with the following command:# python setup.py installDIRECTORIESThe directory structure for the KillerBee code is described as follows:doc – HTML documentation on the KillerBee library, courtesy of epydoc.firmware – Firmware for supported KillerBee hardware devices.killerbee – Python library source.sample – Sample packet captures, referenced below.scripts – Shell scripts used in development.tools – ZigBee and IEEE 802.15.4 attack tools developed using this framework.REQUIRED HARDWAREThe KillerBee framework is being expanded to support multiple devices. Currently there is support for the River Loop ApiMote, Atmel RZ RAVEN USB Stick, MoteIV Tmote Sky, TelosB mote, and Sewino Sniffer.Support for Freaklab’s Freakduino with added hardware and the Dartmouth arduino sketch, Zigduino, and Sewio Sniffer board is available but are not listed below as they are not maintained.ApiMote v4beta (and v3):The devices typically come preloaded and do not need to be reflashed for basic use.The hardware is open-source at https://github.com/riverloopsec/apimote. It is available assembled by contacting team at riverloopsecurity dot com.This is currently supported for beta, and supports sniffing, injection, and jamming.Texas Instruments CC2530/1 EMK:This USB dongle is produced by Texas Instruments and is sold as an evaluation kit for their CC2530 or CC2531 integrated circuit.It can be purchased from electronics distributors, or directly from them here.This is currently supported for beta, and supports sniffing only.MoteIV Tmote Sky or TelosB mode:This device can be loaded with firmware via USB. Attach the device, and then within killerbee/firmware, run:$ ./flash_telosb.shThese boards can be obtained via multiple distributors, however this vendor has stated that their “clone" of the original hardware is compatible. We have not tested nor do we endorse any specific "clone".Atmel RZ RAVEN USB Stick:See http://www.atmel.com/tools/RZUSBSTICK.aspx. This hardware is convenient as the base firmware is open source with a freely-available IDE. The KillerBee firmware for the RZ RAVEN included in the firmware/ directory is a modified version of the stock firmware distributed by Atmel to include attack functionality.The RZ RAVEN USB Stick is available from common electronics resellers for approximately $40/USD:Mouser: http://bit.ly/vZ2ptDigi-Key: http://bit.ly/3T8MaKThe stock firmware shipped with this hardware allows you to leverage the passive functionality included in the KillerBee tools and framework (such as receiving frames), but does not allow you to do packet injection, or to impersonate devices on the network.In order to get the full functionality included in KillerBee, the RZ RAVEN USB Stick must be flashed with the custom firmware included in the firmware/ directory. See firmware/README.md for details.TOOLSKillerBee includes several tools designed to attack ZigBee and IEEE 802.15.4 networks, built using the KillerBee framework. Each tool has its own usage instructions documented by running the tool with the "-h" argument, and summarized below.zbid – Identifies available interfaces that can be used by KillerBee and associated tools. zbwireshark – Similar to zbdump but exposes a named pipe for real-time capture and viewing in Wireshark. zbdump – A tcpdump-like took to capture IEEE 802.15.4 frames to a libpcap or Daintree SNA packet capture file. Does not display real-time stats like tcpdump when not writing to a file. zbreplay – Implements a replay attack, reading from a specified Daintree DCF or libpcap packet capture file, retransmitting the frames. ACK frames are not retransmitted. zbstumbler – Active ZigBee and IEEE 802.15.4 network discovery tool. Zbstumbler sends beacon request frames out while channel hopping, recording and displaying summarized information about discovered devices. Can also log results to a CSV file. zbpanidconflictflood – Requires two killerbee interfaces one killerbee interface listens for packets and marks their PAN ID. The other interface constantly sends out beacon packets with found PAN ID’s. The beacon packets with the same PAN ID cause the PAN coordinator to believe that there is a PAN ID conflict, and the coordinator begins the process of realigning the network on a new PAN ID. The process repeats ad nauseum. Typically, network devices can’t keep up with the rapid change and after several seconds the network falls apart. _NO TARGETING BUILT IN_ This may *destroy* all zigbee networks within range on the channel you are performing the attack on. Use with caution.zborphannotify – Spoofs an orphan notification packet from the target device to a PAN Coordinator to test Coordinator behavior. zbrealign – Spoofs an 802.15.4 PAN Realignment frame from the coordinator to a target device. May be able to reset the device’s PAN ID or Channel zbfakebeacon – Spoofs beacon frames, either spamming them or on response to seeing a beacon request come through. zbopenear – Assists in data capture where devices are operating on multiple channels or fast-frequency-hopping. It assigns multiple interfaces sequentially across all channels. zbassocflood – Repeatedly associate to the target PANID in an effort to cause the device to crash from too many connected stations. zbconvert – Convert a packet capture from Libpcap to Daintree SNA format, or vice-versa. zbdsniff – Captures ZigBee traffic, looking for NWK frames and over-the-air key provisioning. When a key is found, zbdsniff prints the key to stdout. The sample packet capture sample/zigbee-network-key-ota.dcf can be used to demonstrate this functionality. zbfind – A GTK GUI application for tracking the location of an IEEE 802.15.4 transmitter by measuring RSSI. Zbfind can be passive in discovery (only listen for packets) or it can be active by sending Beacon Request frames and recording the responses from ZigBee routers and coordinators. If you get a bunch of errors after starting this tool, make sure your DISPLAY variable is set properly. If you know how to catch these errors to display a reasonable error message, please drop me a note. zbgoodfind – Implements a key search function using an encrypted packet capture and memory dump from a legitimate ZigBee or IEEE 802.15.4 device. This tool accompanies Travis Goodspeed’s GoodFET hardware attack tool, or other binary data that could contain encryption key information such as bus sniffing with legacy chips (such as the CC2420). Zbgoodfind’s search file must be in binary format (obj hexfile’s are not supported). To convert from the hexfile format to a binary file, use the objcopy tool: objcopy -I ihex -O binary mem.hex mem.bin zbwardrive – Discovers available interfaces and uses one to inject beacon requests and listen for respones across channels. Once a network is found on a channel, it assigns another device to continuously capture traffic on that channel to a PCAP file. Scapy must be installed to run this. zbscapy – Provides an interactive Scapy shell for interacting via a KillerBee interface. Scapy must be installed to run this. Additional tools, that are for special cases or are not stable, are stored in the Api-Do project repository: http://code.google.com/p/zigbee-security/ and at https://github.com/riverloopsec/beekeeperwids.FRAMEWORKKillerBee is designed to simplify the process of sniffing packets from the air interface or a supported packet capture file (libpcap or Daintree SNA), and for injecting arbitrary packets. Helper functions including IEEE 802.15.4, ZigBee NWK and ZigBee APS packet decoders are available as well.The KillerBee API is documented in epydoc format, with HTML documentation in the doc/ directory of this distribution. If you have epydoc installed, you can also generate a convenient PDF for printing, if desired, as shown:$ cd killerbee$ mkdir pdf$ epydoc –pdf -o pdf killerbee/The pdf/ directory will have a file called "api.pdf" which includes the framework documentation.To get started using the KillerBee framework, take a look at the included tools (zbdump and zbreplay are good examples to get started) and the simple test cases in the t/ directory.Since KillerBee is a Python library, it integrates well with other Python software as well. For example, the Sulley library is a fuzzing framework written in Python by Pedram Amini. Using the Sulley mutation features and KillerBee’s packet injection features, it is staightforward to build a mechanism for generating and transmitting malformed ZigBee data to a target.Download Killerbee
RCE on GPON home routers (CVE-2018-10561)VulnerabilityMany routers today use GPON internet, and a way to bypass all authentication on the devices (CVE-2018-10561) was found by VPNMentor. With this authentication bypass, it’s also possible to unveil another command injection vulnerability (CVE-2018-10562) and execute commands on the device.At the time it was written almost ONE MILLION of these devices are exposed to the Internet, according to Shodan.Dependencies requiredrequestsurllib2Tested onKali LinuxUbuntu 17.10 ServerUsagepython gpon_rce.py TARGET_URL COMMANDe.g.python gpon_rce.py http://192.168.1.15 ‘id’ScreenshotsDownload GPON
Juniper warned Thursday of a high-risk bug in the GD graphics library used in several versions of its Junos OS.